Tuesday 11 October 2022

Changes and possible changes to Royal heraldry & vexillology

Pre 1953 Royal Coat of Arms with Tudor Crown.
Compare to variant used by Elizabeth II
 Credit Sodacan CC BY-SA 3.0
 With the sad passing of HM Queen Elizabeth II last month and the accession of HM King Charles III to the throne there will be some changes to royal symbols across the United Kingdom as well as the Commonwealth Realms. Now that the mourning period for the late Queen has passed I think it is appropriate to take a look at some of the heraldic changes. First and perhaps the most important as this will affect all Royal heraldry outside of Scotland is the crown (within Scotland the ancient Scots Crown is used on Royal heraldry). The St Edwards Crown we are all used to seeing on badges, cyphers, coats of arms and other symbols will change to the Tudor Crown. often referred to as the 'King's Crown' this was the crown used by George VI, Edward VIII, George V, and Edward VII. Now it was not a certainty that the crown would change, the choice of crown is up to the King. But when the new cypher of the King was published it featured the Tudor Crown which seems to confirm that the Tudor Crown will be used from now on. 

I confess I was slightly surprised at this as I was half expecting the King to decide to keep the St Edwards crown. Both out of a sense of constancy and practicality as this will be a major change in branding across the Commonwealth, affecting everything from military cap badges to post vans, and courts to passports.

Commonwealth Standards

Another change will be Royal Standards. While the Royal Standard of the UK will remain the same for it is simply a heraldic banner the same is not true of those used in the some of the Commonwealth Realms. The personal flags that the Late Elizabeth II used in Canada, Australia, New Zealand and Jamaica all made use of the device used on her personal flag. This was a crowned letter 'E' within a wreath of roses. This was something a lot of heraldry fans disliked as the banner of arms by itself represented the monarch. Perhaps now that we have a new King this will be dropped from the Royal Standards of the Commonwealth Realms. 

If not though these are my proposals for those realms in which the King has his own unique standard. In all these cases I put the flag in an ermine border. My thinking here is that the flags of members of the Royal Family be distinguished by an ermine border. Whereas the Governor General could use a banner without an ermine border. I've also used the full cypher as a crowned 'C' will look an awful lot like the monogram of the Queen Consort. I've deliberately chosen not to use the roses used in the personal flag of Queen Elizabeth II,

Proposed King's flag for Canada.
Like the flags of other Royal Family members the cypher is within a garland of maple leaves

Proposed King's flag for use in Australia 


Proposed King's flag for use in New Zealand 
note use of ferns, around cypher

Proposed King's flag for use in Jamaica

As head of the Commonwealth Queen Elizabeth II used a flag that was designed to represent her as a person rather than the monarch of a realm or nation. As Prince of Wales never used such a flag so I am not sure he will feel the need to use one as King. If he does I thought of one on similar lines to that of his mother.

It is simply a blue flag with his cypher. I didn't use the roses his mother used. Given this is more personal I thought a rope circle symbolising his naval background might be more appropriate.

The Queen Consort

Another change is that as well as a new King we have a new Consort  (the title Queen Consort is used in this post to avoid confusion with the Late Queen and because although used in the past at the time if writing it is unclear if the title 'Queen' will be used). The consort of the monarch is the only royal spouse entitled to use their own standard (other spouses use the Royal Standard for members of the Royal Family without a personal standard). For Queen Consorts this is a banner of their coat of arms which is the arms of their husband  impaled with either their own or their father's arms. Hence the Queen Consorts Royal Standard will be the Royal Arms impaled with the arms of the Shands of Craig, Aberdeenshire. 
Standard of  the Queen Consort
Credit: Fry1989 CC BY-SA 4.0
Will there be seperate flags for Commonwealth Realms?  It is probably unlikely that the Queen Consort will travel to any of the Commonwealth realms without the King and so negating the need to use a unique flag. However I've had ago at throwing together some proposals. First is is the Shand arms impaled with the Royal Arms in right to the appropriate Commonwealth Realm.
 
Proposed Queen Consort's flag for use in Canada


Proposed Queen Consort's flag for use in Australia

Proposed Queen Consort's flag for use in New Zealand

Proposed Queen Consort's flag for use in Jamaica
Another option is to use the relevant Royal Standard and replace the King's Cypher with Camilla's monogram however I think that would be indistinguishable from the Royal Standard itself.  
Personally I think this shows the merits of not defacing the banners with cyphers. 

Other Members of the Royal Family

Something that I haven't heard mentioned or read anywhere is what this means for the coat of arms of the children of the King. 
Traditionally children of the Sovereign  and the first heir apparent use the Royal Coat of Arms differenced with a label of Three Points and other grandchildren of the Sovereign use the Royal Coat of Arms differenced with a label of five points. The points of the label being differenced by a heraldic charge usually a charge associated with the maternal line. According to Wikipedia (so take it with a grain of salt) HRH Prince William of Wales is already using the Royal Coat of Arms differenced with a label of three points.
arms currently used by HRH the Prince of Wales
Credit: Lobsterthermidor, CC BY-SA 3.0

This is not the arms used by previous Princes of Wales, which had an inescutcheon of the arms of Wales. The King was quick to announce that Prince William will become the Prince of Wales and he is already being referred to by that title. However he has not yet been formally invested as Prince of Wales or been granted any amendments to his coat of arms and that is not likely to happen until after the coronation. So we will probably see the inescutcheon granted along with the various badges and arms of the prince of Wales and Heir Apparent either before or immediately after the investiture of the Prince of Wales.
Arms of Prince of Wales 1917-2022
Credit: Sodacan, CC BY-SA 3.0

Another change could be in the coat of arms of the Duke of Sussex. Presently Prince Harry uses the Royal Arms differenced with a label of five points with the outer and centre point charged with an escallop (reference to the Spencer Arms). A label of five points is of course traditional for a grandchild of the Sovereign, but the Duke is now a child of the Sovereign. So this could change to a label of three points.  In such a case I would propose charging the outer labels as a single escallop on the central point was used by his brother.
proposed arms for Duke of Sussex
These changes would of course be reflected on the arms of their spouses. 

Seals

The royal seals of the United Kingdom are four things that will change. The royal seals are affixed to legislation when they receive Royal Ascent, these are the Great Seal of the Realm (used for Acts of Parliament), the Great Seal of Scotland (used for Acts of the Scottish Parliament), The Great Seal of Northern Ireland (used for Acts of the Northern Ireland Assembly) and the Seal of Wales (Acts of Senedd Cymru). When a monarch passes away new seals are made and the old ones are decommissioned by being defaced by a hammer. 
All the seals feature an image of the monarch either enthroned or on horseback with heraldry on the reverse.
This is unlikely to change, although in the cases for the Northern Ireland and Welsh seals it would be a good opportunity to update the heraldry. Under George V and George VI (and presumably Elizabeth II)the reverse of the Great Seal of Northern Ireland featured royal arms with an inescutcheon of a red cross of gold field from the arms of Ulster. I would propose a variant of the Royal coat of arms with the heraldry of the Kingdom of Ireland:
proposed NI variant of Royal Coat of Arms

It features the Irish harp in the first and fourth quarters. The historic crest of Ireland on the hem and the Order of St Patrick as well as a compartment of shamrock. The supporters feature an Irish Elk and British lion bearing the flag of St Patrick and the aforesaid red cross on gold field. 
Something similar could be done on the Welsh Seal. The arms of Wales could be given dragon supporters and placed on the reverse allowing the image of the monarch to take up the entire obverse.
proposed coat of arms of Wales
credit: SuperPanetone Reddit



Saturday 17 September 2022

Utah Flag Proposal

 This is a post I that I have been waiting a year or so to write. The American State of Utah is currently in the processes of replacing their current flag wit something more befitting the state rather tan the state seal on a blue field. I submitted a proposal which  I would like to share. I waited until the finalists were chosen encase sharing it would unfairly promote my design above the others or compromise its integrity.  However now that the finalists are chosen (unfortunately but unsurprisingly given the amount of proposals my design is not among them) I think I can safely share it without fear of unduly effecting the process. 

My design is I believe in keeping with the five NAVA design principles. Its simple but meaningful. It uses no more than three colours and it relatable (and I hope distinctive) with no lettering or seals.

The blue and white bars reflect the blue and white stripes on many of the flags used by the Mormon Pioneers and the State of Deseret. The layout of the bars is designed to resemble ruts made by wagon wheels and rail lines. This represents both the pioneers who came to and crossed Utah in wagon trains and those who came during the construction and after the completion of the transcontinental railroad. The three white bars represent the three distinct geological regions that converge in Utah: The Rocky Mountains, the Great Basin and the Colorado Plateau. I hope that in this way all the natural diversity of the state ranging from sand dunes, pine forests and mountain valleys are represented and that this might also reflect on the diversity of the people.

The barry field is charged with a double hexagon. This is off centre towards the hoist so that it may be visible and recognisable both when the flag is flying and when it is at rest (no wind), both from a vertical flagpole and an outrigger. The central symbol is the beehive, which is an iconic symbol unique to Utah (at least in the United States) with historical and symbolic significance. It has been the principal symbol on every Utah flag since 1911.

The star above the hive represents Utah’s statehood in the United States of America, whereas the spike below the hive is symbolic of the golden spike that joined the tracks of the Central and Union Pacific RR companies. This made Utah the place where the east coast met the west coast and thus is symbolic of the linchpin in Utah that via the transport infrastructure holds the nation (and arguably by extension the world) and its economy together.

The hexagons are reflective of the honeycomb found in beehives thus reinforcing the symbolism of the beehive. The outer hexagon represents the six other states that touch Utah’s boundaries. Wyoming, Idaho, Nevada and the other three states that meet at the four corners: Colorado, Arizona and New Mexico. Thus, representing Utah’s unique geographical position. Last but by no means least the inner hexagon represents the six Native American peoples that live in Utah: Shoshone, Goshute, Navajo, Paiute, Northern Utes, and White Mesa Utes.